|
To get the best possible performance from your sound system, you need to use
good quality cables. Shoddy, poor quality, low priced cables mean that power
and quality will be sacrificed.
After huge amounts of laboratory and road testing, TheLoudest.com are able to
manufacture and compile the TL-1101 complete set of premium cables ready to
use. With the TL-1101 professional car amplifier wiring kit, you can rest assured
that you will be able to get the best from your sound system, allowing the amplifier
and speakers to realise their full potential. Delivering low loss, high current
instantaneous power without distortion.
The attention to important details (like the gold plated connectors, oxygen-free
copper power, ground and speaker cables, double shielded RCA cable and a battery
terminal distribution block to ensure a clean connection to the battery), means
that you can trust this competition grade wiring kit to connect your system
together.
Unlike most "wiring kits", the TL-1101 comes with the connectors
and accessories already installed. This means that you can rest assured that
good clean connections have been made. This takes a lot of the time and hassle
away from the job, leaving you to just "plug and play".
This 8000w (3,000w RMS) 0AWG amplifier installation wiring kit is ideal for the installation
of the TL-1021, and includes everything that is normally needed
for a standard installation.
Contents of kit:
| Power cable
- 6 meters, Red.
- 0 Gauge (AWG)
- Oxygen free copper (OFC).
Accessories already installed:
- ANL fuse holder, with 250A fuse.
- Gold plated battery end ring terminal, inner diameter of 8.3 mm.
- Gold plated amplifier end terminal (0/2 AWG).
|
|
Ground cable
- 1 meter, Brown.
- 0 Gauge (AWG).
- Oxygen free copper (OFC).
Accessories already installed:
- Gold plated earthing point ring terminal, inner diameter of 8.3 mm.
- Gold plated amplifier end terminal (0/2 AWG).
|
RCA (phono) cable
- 5 meters, Blue and Silver.
- Oxygen free copper (OFC).
- Double shielded.
- Twisted.
Accessories already installed:
- Plastic moulded RCA (phono) plugs, both ends.
|
|
Speaker cable
- 4 meters, Clear Blue.
- External diameter: 2x 6.6 mm squ (2 x 9 AWG).
- Oxygen free copper (OFC).
|
Remote turn on wire
- 5 meters, Blue.
- 18 Gauge (AWG).
Accessories already installed:
- Gold plated 4.2mm spade terminal at amplifier end.
- Crimp type connector at source unit end.
|
|
Battery terminal/distribution block
- 0 Gauge (AWG) x1
- 4 Gauge (AWG) x1
- 8 Gauge (AWG) x2
- Nickel plated.
|
Fuses
- Two 250 Amp AGU fuses included,
(one installed and one spare).
|
|
|
Manual
Clear and precise installation instructions are provided in the installation
manual which may also be downloaded further down on this page. |
Battery terminal/distribution block:
Using this distribution block ensures that a good clean contact is made to the
battery. This is vital in ensuring that the amplifier can draw the required power.
It also tidies up connections to the battery and enables the battery to be removed
quickly and easily if required.
Owner's Manual:
For a detailed description of how to install the wiring kit, and everything
you need to know, please read through the owners manual. The manual is around
0.5 mb in size and is in PDF format, so you will need Acrobat
Reader installed.
Please feel free to inspect the wiring kit by viewing the range of photographs
to the right of this text.
|
|
|
|
;)
;)
;)
;)
;)
